My Web Stats

KIT pod
KIT watch closeup
KIT watch black

Many personal emergency alarms only work around the home, restricting your independence and freedom. K.I.T Connectivity Solutions device is lightweight, at just 51 grams it can be worn just like an everyday watch. Flexibility and discreteness are core to our product offering and so we have designed the 'POD' to be adapted from a watch to a worn device using a snap-on accessory, enabling fast transition the POD can be attached to a belt loop, a handbag or a pendant. 

As a wrist worn device, we have paid particular attention to the look and feel of the included strap to ensure that it is soft whilst remaining durable and easy to clean. Every watch comes with a black strap included, additional accessories can be purchased including a lockable buckle and a soft pink colour strap.

Customisable Features.

K.I.T Connectivity Solutions offer the benefit of being able to be customised to suit individual needs via the Online Client Console (OCC). The result is a bespoke device that is so much more than a watch that tells the time or pendant device that only works indoors. From the device you can make and receive calls, auto answer an incoming VIP call number or reject all calls when set up in the Online Client Console. Below are just some of the features included.

Fall Detector

Fall sensor

Should the wearer be prone to falling or work in a high risk height environment, the built-in Fall Sensor, when activated, can contact your nominated emergency number and alert your nominated contacts.


 Location Assist

K.I.T Connectivity Solutions are designed to assist to locate the wearer in the case of an emergency. When an alert is triggered the device uses a number of location parameters and an algorithm to configure a location available to view on the Online Client Console. 


Geo Fence

Via the Online Client Console, a Geo fence perimeter based on an address location or a polygon drawn perimeter, can be utilised in providing a safe level of independence to the wearer. The Geo Fence works using GPS satellite and so the wearer will need to be in an outside location to enable this feature to operate successfully.


Medication, Food, Drink
& Transport reminders

Everyone is busy during the day and sometimes we forget important things like taking medication or that we are being picked up for an important event. K.I.T Connectivity Solutions can assist with this and enable visual and haptic reminders 24-hours a day. These are all easily set up in the Online Client Console.



A black cross hatched button is easily located on the right lower side of the POD. In the case of an emergency needing to be triggered the wearer presses and holds the button for 3 seconds and the nominated Alert Contact will receive the SOS alert and a phone call initiated. The nominated alert contacts will also receive an email and/or an sms to let them know that an event is occurring.

GPS Locator


K.I.T Connectivity Solutions uses SSID to find a MAC address when you are in an indoors location. This will work where Google has provided this information. If your home address isn't available through Google we can assist to ensure your home location is always available, just contact us to find our more.



The bathroom can be hazardous with wet tiles, slips and falls are common. Its important then that the device is waterproof to enable you to wear it in the shower and wet areas. K.I.T Connectivity Solutions provide IP67 rating for our device. 


24/7 monitoring

We have a number of options available for 24/7 connectivity to a call-monitoring service. Our partners are experts in their field and we will connect you to the most appropriate centre depending on your needs as a lone worker or when you are requiring medically trained personnel.

KIT_Web_Icon Checkin

Security Check-In

Your safety and security is important and with K.I.T Connectivity Solutions you are able to utilise the check in - check out function to alert an employer that you need assistance or an event occurs whilst you are in an unknown or at-risk setting.


Alert Contacts

Flexibility to have friends and family or a 24/7 monitored service are all available with K.I.T Connectivity Solutions. Set your SOS alert to go to someone that is able to assist in an emergency and alert family and friends by email and or SMS if an event occurs. For the wearer this all happens with a 3 second push of the black SOS button, simple! 


Communication Options

There are many options in which you can communicate with people and keep connected. Two preset numbers can be called, using the top and lower left-hand silver buttons. You can assign VIP numbers that can call in and be auto-answered, as well as reject all calls so you don't receive unwanted calls. Calls can be one-way or two-way, depending on your situation. Buttons can easily be disabled when not required.


Movement alerts

If an alert has been triggered, it can be helpful to know if the wearer is walking or in a moving vehicle. To know if someone is moving, a speed alert can be set in the Online Client Console. There is also a non-movement alert that can be set on the device that triggers when there is no movement at all for ten minutes and the device is not on a charger.


Where will your technology and devices work?

The K.I.T Personal Safety Devices operates on the 3G mobile networks across Australia and internationally. This means it will work in similar areas to a mobile phone and with the same limitations (e.g. it may not work in an underground basement or in remote areas away from coverage). It is recommended that you check cellular (mobile) coverage in the areas you will be likely to use the device.

Telstra advise the eventual switch off of the 3G network will not happen until June 2024.

Can K.I.T Connectivity Solutions be used as a duress alarm for personal safety?

Absolutely. K.I.T Connectivity Solutions personal safety device is designed to support the lone worker as well as persons working or visiting threatening locations. The K.I.T functionality includes 2-way voice with the option for 1-way (security mode) audio, dedicated duress button, check-in function together with worker down functions (fall alert and non movement alert). It can also be integrated into a 24/7 monitoring centre for high level support and support.

How is your technology different from an app?

K.I.T Connectivity Solutions are just that a device and On line Client Console that is mobile optimised so it works on everything from a computer to a smart phone. It is a dedicated, standalone personal safety device, with its own SIM card. Unlike an app you do not need to unlock the screen or look at the device to be able to trigger an alert. Furthermore, it can be carried discretely on a belt loop using the snap on accessory, so even if your smartphone is snatched from you can still trigger and SOS alert from your K.I.T device.

Can your technology be customised?

Find-me Technologies, an Australian company, developed the device and own all of the software solution meaning that we have flexibility, that some other products don't, to tailor to bespoke corporate clients needs. Please let us know what you may need and we can advise accordingly.

How is K.I.T Connectivity Solutions device different from a panic alarm?

Panic alarms are generally limited by functionality and often have little or no status displays, relying upon you to understand what each blinking light means. They also are not designed to be worn as a watch, so are restricted by form factor.

Your K.I.T Connectivity Solutions personal safety device also includes additional features such as auto answering for selected numbers, geo-fence and area alerts, fall sensors etc. plus you have access to our dynamic Online Client Console to view the status of your device at any time.

What if I am unable to wear a watch?

Wearability is key to ensuring that K.I.T Connectivity Solutions is flexible and able to adapt to individual needs. Available as an optional accessory, a snap on clip changes the POD from a watch worn device to a carabiner, key ring or pendant device. The snap on accessory does not need to be removed to charge as it easily connects to a supplied charger. It is a simple process to change from one form factor to another.

What if I have a pacemaker

The device does contain a magnet and those who have pacemakers will need to seek opinion of their clinician if they are wanting to wear the device as a pendant around the neck. The pendant attachment does allow for the the device to be connected to a carabiner which can be clipped onto a belt or bag, if the wearer does not want to wear the device as a watch.

What if the wearer keeps removing the K.I.T Connectivity Solutions device?

There is an optional accessory that can be utilised in this instance. A discrete locking strap is available which secures the device to a person’s wrist. In addition, by using the non-movement alert setting the watch can be set to send an alert if there is absolutely no movement detected from the device for 10 minutes (excluding when it’s on charge) meaning that the person has taken the device off and it is stationary.

Can the K.I.T Connectivity Solutions device be worn in the shower?

Yes, the 'POD' is rated IP67, which means it can be worn in the shower with the watch strap attachment in place.

Will my K.I.T Connectivity Solutions device work with 4G?

The network that is utilised is 3G mobile network. The important factor is the frequency of the network. K.I.T Connectivity Solutions uses 850MHz, 900MHz and 2100MHz frequencies and the 4G network uses the 2100MHz frequency. In Australia the 4G network is primarily used for data with calls dropping back to 3G. If you are not in Australia check if these frequencies are available in your region. Check Frequencies

Telstra advise the eventual switch off of the 3G network will not happen until June 2024.

How do I maximise my battery life?

If you are experiencing low battery life there could be a number of things you can do to extend this

  1. Contact the place of purchase to discuss increasing the time between location look-ups
  2. Limit the number of voice calls and only use this feature in an emergency
  3. Ensure that you keep the watch on charge for a full charge period and see the battery full status before taking the device off of the charger. Also ensure that you only charge the device using the supplied charger.
  4. Turn off any alerts that are not needed or used
  5. Keep the screen brightness at the mid level setting (your place of purchase can assist you with this)
How do I charge the battery?

Every device is supplied with a charging pad and a power plug. Simply plug in the charging pad to the power plug and hover the POD over the charging pad, it will click into place as it is magnetic. It will only go on correctly one way when the magnets on the POD and charging pad align. If the device is off you will see the large battery charging ICON. If the device is on you will see the small battery icon in the top right hand corner flash to demonstrate it is charging or remain solid if it is full. If either of these are not visible, check the charging pad is connected correctly and the power is turned on. Check that the magnets on the device are clean and free of oil and dirt and that the pins on the charging pad are clean and free of first by gently wiping with a lint free cloth whilst disconnected from the power source.

The device does contain a magnet and those who have pacemakers will need to seek opinion of their clinician if they are wanting to wear the device as a pendant around the neck.

How do I know if my K.I.T Connectivity Solutions device is low on battery?

At 20% and 5% of battery life an alert will be sent from the watch to the server, any nominated contacts that are set to see low battery alerts will receive an SMS and/or an email. The device will show low battery ICONS at 5% and 20% and if you have vibrate enabled it will also vibrate at this time. The device shuts down at 2% battery life. The battery level can also be checked at any time via the Home page on the map location bubble pin.

Do I need a SIM card?

Yes, you will need a Nano SIM card. This is provided and the costs included with subscription.

Where do I find my phone number, IMIE and serial number on the device?

The IMIE, phone number and serial number will all be provided to you at the time of purchase. The serial number is etched into the back of the watch and the IMIE is available on your Online Client Console. The mobile number can easily be obtained, if not known, by placing a mobile number into the number set to dial and so when calling them your number will be displayed.

Does K.I.T Connectivity Solutions comply with regulatory requirements?

Yes. K.I.T Connectivity Solutions fully complies with all mandatory regulatory standards for sale of products in Australia, New Zealand, Europe and the US. The Australian Communications and Media Authority (ACMA) are responsible for setting standards that all mobile communication products must be tested against. These tests include Electrical Safety, Electromagnetic Compliance (EMC), Specific Absorbtion Rate (SAR), Electromagnetic Radiation and various mobile network interoperability tests to name a few. K.I.T Connectivity Solutions carries the Regulatory Compliance Mark (RCM) which is represented by a triangle with a small tick, the CE mark (Europe), FCC (USA) and (recycle bin icon) to prove it.

Is WIFI available?

Yes, WiFi is used as part of our positioning system however connections to regular WiFi data networks is currently not supported.

Are the materials used in K.I.T connectivity Solutions safe?

Yes, K.I.T Connectivity Solutions device has been manufactured using safe and hypoallergenic materials and fully complies with the EU Restriction on Hazardous Substances (RoHS) directive 2002/95/EC.

How do I check for firmware updates?

Log into the Online Client Console using a PC and select the device you wish to check for updates on. By placing the device onto a charger and connecting it the PC you will then click on search for updates on the General Settings page. If you have not download the software, a set up wizard will take you through this the first time and install a short cut onto your desk top for use at any time.

Is my data safe?

Security is a high priority and as such your data is stored in government approved servers located in Australia and our data is encrypted to ensure privacy of our clients. You can see our full privacy policy here.

How do I add or change any settings?

All settings are changed via the Online Client Console. You will be given a User name and Login when you purchase your K.I.T Connectivity Solutions product. If you do not receive these, please contact the place of purchase to obtain them. To ensure your settings are secure please do not share these log in details.

You will see a menu at the left hand side of the main home page. Toggle through these to find the General Settings tab where all of your general settings can be placed and changed at any time. This includes what numbers your top and lower left hand buttons will call, your nominated SOS and alert contacts and of course the name and picture you would like to set for your device.

I cannot see anything on my device face, what's wrong?

Potentially nothing is wrong with your device. The device face is not touch screen to make it easy to use and ensure wearers are not complicated by multiple screens that can be confusing in an emergency situation. To see the time on the device simply touch any button briefly, no longer than 1 second and the watch face will show for the designated time you have set in the Online Client Console. If you cannot see anything when pressing any button, then place your device on charge for at least 2 hours and try to turn on by pressing the top left silver button. If this does not work contact your place of purchase.